In the European market, due to the heat wave in Europe, the Rhine River, one of the main traffic arteries in Europe, has fallen sharply, causing logistical problems for barges transporting i…
Lightweight foamed concrete, also known as foamed cement, is a lightweight porous concrete product made from foaming agent aqueous solution into foam, and then adding foam to the slurry made of cement-based cementitious materials, aggregates, admixtu…
The filling elevation of the foam light soil with different strengths shall be constructed in strict accordance with the design requirements. The anti-seepage geomembrane on the top of the foam light soil subgrade shall be laid under the metal mesh,…
The TR-B (foaming agent) can be mixed with cement slurry to produce lightweight porous concrete. Dilute TR-B (foaming agent) with water, isolate it from the foam machine to obtain foam, and mix the foam with cement and gypsum mortar to obtain an insu…
Foam stabilizer, also known as concrete foam stabilizer, is the most important foam stabilizing component in the foam agent. Among the various factors that stabilize the foam, the foam stabilizer is the first influencing factor. It is usually added t…
The properties of the cellular concrete are strongly influenced by the type of foaming agent used.…
TR75 foam generator developed by our company. It can be used in laboratories, small-scale foam concrete cast-in-situ projects, and pilot lines of foam concrete products. The outstanding advantages of TR75 portable foam generator are low foam moisture…
The team created the world lightest isotope of magnesium to date show impotrance of the superplasticizer types The isotope, forged at the National Super Superconducting Cyclotron Laboratory at Michigan State University (MSU), is so unstable that it b…
The team created the world lightest isotope of magnesium to date show impotrance of the molybdenum disilicide elements The isotope, forged at the National Super Superconducting Cyclotron Laboratory at Michigan State University (MSU), is so unstable t…
Engineers at the University of New South Wales have demonstrated a way to make 3D-printed plastics self-repair at room temperature using only light. Professor Cyril Boyle from the UnSW School of Chemical Engineering and his team Dr. Nathaniel Corriga…
Engineers at the University of New South Wales have demonstrated a way to make 3D-printed plastics self-repair at room temperature using only light. Professor Cyril Boyle from the UnSW School of Chemical Engineering and his team Dr. Nathaniel Corriga…
New materials including the superplasticizer market trend is one of the main directions of science and technology development in the 21st century With the development of science and technology, people develop new materials superplasticizer on the bas…