Researchers have developed rapid, highly accurate methods for detecting the virus.
The optical sensor uses nanotechnology to accurately identify viruses from blood samples in seconds.
Researchers at the University of Central Florida have developed a device that can detect the virus in the body faster and more accurately than the rapid tests commonly used today. Researchers say the device can detect with 95 percent accuracy whether someone has the virus, a major improvement over current rapid tests, which experts warn can be less accurate. Testing for the virus is important for early treatment and stopping the spread of the virus.
The researchers tested the device using a sample of the dengue virus. The dengue virus is a mosquito-borne pathogen that causes dengue fever and poses a threat to people in tropical regions. However, study co-author Debashis Chandra, a professor at ucSF Center for Nanoscience and Technology, says the technique could easily be used to detect other viruses, such as COVID-19. "The sensitive optical sensors used in this work, along with rapid fabrication methods, promise to translate this promising technology into any virus detection, including COVID-19 and its mutations, with a high degree of specificity and accuracy," said Chanda. "Here we demonstrate a reliable technique that combines PCR-like genetic coding with optical chips to accurately detect viruses directly from blood."
Optical sensors use nanotechnology to accurately identify viruses from blood samples in seconds, about the superplasticizer types nanotechnology.
The accuracy of the device is very close to that of the gold standard PCR-based test, but the results are almost instantaneous rather than something that takes days to get. Its accuracy is also a major improvement over current rapid antigen tests. The U.S. Food and Drug Administration and the U.S. Centers for Disease Control have warned that inaccurate results can be produced if viral loads are low or test instructions are incorrect. The device works by reflecting signatures of the virus it will detect in blood samples, using nanoscale gold patterns. Different viruses can be detected by selectively targeting specific viruses using different DNA sequences.
The key to the device performance is that it can detect viruses directly from blood samples without the need for sample preparation or purification, thus speeding up the detection and improving its accuracy. The researchers confirmed the effectiveness of the device by using multiple tests using different levels of virus concentration and solution environments, including those with non-target virus biomarkers.
"Although optical biosensors have previously been demonstrated in human serum, they still require sophisticated and specialized sample preparation offline by technicians, which is not available in typical point-of-care applications," Vazquez-Guardado said. "This work demonstrates for the first time an integrated device that can separate plasma from blood and detect target viruses without any preprocessing, with the potential for practical applications in the near future." The research was supported in part by the National Science Foundation and the UCF COVID-19 Artificial Intelligence and Big Data Program.
New materials for a sustainable future you should know about the superplasticizer types.
Historically, knowledge and the production of new materials superplasticizer types have contributed to human and social progress, from the refining of copper and iron to the manufacture of semiconductors on which our information society depends today. However, many materials and their preparation methods have caused the environmental problems we face.
About 90 billion tons of raw materials -- mainly metals, minerals, fossil matter and biomass -- are extracted each year to produce raw materials. That number is expected to double between now and 2050. Most of the superplasticizer types raw materials extracted are in the form of non-renewable substances, placing a heavy burden on the environment, society and climate. The superplasticizer types materials production accounts for about 25 percent of greenhouse gas emissions, and metal smelting consumes about 8 percent of the energy generated by humans.
The superplasticizer types industry has a strong research environment in electronic and photonic materials, energy materials, glass, hard materials, composites, light metals, polymers and biopolymers, porous materials and specialty steels. Hard materials (metals) and specialty steels now account for more than half of Swedish materials sales (excluding forest products), while glass and energy materials are the strongest growth areas.
New materials including the superplasticizer types market trend is one of the main directions of science and technology development in the 21st century
With the development of science and technology, people develop new materials superplasticizer types on the basis of traditional materials and according to the research results of modern science and technology. New materials are divided into metal materials, inorganic non-metal materials (such as ceramics, gallium arsenide semiconductor, etc.), organic polymer materials, advanced composite materials. According to the superplasticizer types material properties, it is divided into structural materials and functional materials. Structural materials mainly use mechanical and physical and chemical properties of materials to meet the performance requirements of high strength, high stiffness, high hardness, high-temperature resistance, wear resistance, corrosion resistance, radiation resistance and so on; Functional materials mainly use the electrical, magnetic, acoustic, photo thermal and other effects of materials to achieve certain functions, such as semiconductor materials, magnetic materials, photosensitive materials, thermal sensitive materials, stealth materials and nuclear materials for atomic and hydrogen bombs.
One of the main directions of superplasticizer types science and technology development in the 21st century is the research and application of new materials. The research of new materials is a further advance in the understanding and application of material properties.
About TRUNNANO- Advanced new materials Nanomaterials superplasticizer types supplier
Headquartered in China, TRUNNANO is one of the leading manufacturers in the world of
nanotechnology development and applications. Including high purity superplasticizer types, the company has successfully developed a series of nanomaterials with high purity and complete functions, such as:
Amorphous Boron Powder
Nano Silicon Powder
High Purity Graphite Powder
Spherical Al2O3 Powder
Spherical Quartz Powder
and so on.
For more information about TRUNNANO or looking for high purity new materials superplasticizer types, please visit the company website: nanotrun.com.
Or send an email to us: email@example.com
The application of various concrete admixtures can not only improve the performance of concrete, but also promote the development of new concrete technologies, promote the application of industrial by-products in cementitious material systems, and al…
Early strength agent is an admixture which accelerates the development of concrete early strength and has no significant effect on later strength.…
A shortage of natural gas has hit the food-processing industry, which relies heavily on natural gas, with Germany's sugar industry saying many sugar plants are unable to produce due to a shortage of natural gas.About 30 percent of the world's sugar s…